XBOX 360 mit aon ins XBOX LIVE

Hier kannst du sonst alles loswerden, was dich bedrückt.

Moderatoren: Matula, jxj, brus

Antworten
anuseth
Einmal-Poster
Beiträge: 1
Registriert: 03.12.2005, 13:25

XBOX 360 mit aon ins XBOX LIVE

Beitrag von anuseth » 03.12.2005, 14:29

Hi Leute,
ich weis das gehört hier nicht hin, aber ich hab ja kein anderes Forum dafür gefunden.... wisst ihr wie man mit der XBOX 360 ins Live connecten kann ?
ich habe keinen router sondern nur das speedtouch 510 und ne ISDN Leitung von Aon.
wenn ich alles auf automatisch stelle kommt immer bei DNS SERVER EIN FEHLER.
ich weis nicht mehr weiter

tullista
Moderator oder Gottheit !?
Beiträge: 551
Registriert: 04.09.2005, 22:06
Wohnort: Wien

Beitrag von tullista » 03.12.2005, 15:18

Ich kenne mich mit Spielkonsolen leider nicht aus, jedoch habe ich mal eine Playstation connected.
Du bräuchtest einen Router an Deinem Speedtouch (geht nur mit Ethernet), wo Du dann Deinen PC sowie die XBOX anschließt. Dann in der XBOX alle auf automatisch stellen (heißt daß alle IP Einstellungen per DHCP übermittelt werden) und das solls dann auch schon gewesen sein.
Routerempfehlung: WRT54G, gibts ab 65 Euro
Zuletzt geändert von tullista am 03.12.2005, 16:05, insgesamt 2-mal geändert.

tullista
Moderator oder Gottheit !?
Beiträge: 551
Registriert: 04.09.2005, 22:06
Wohnort: Wien

Beitrag von tullista » 03.12.2005, 15:52

Auf www.xbox.com gibts Hilfestellungen.

Falls Du ohne Router auskommen möchtest, also immer nur mit PC oder XBOX im Internet sein möchtest ginge auch folgender Weg. Das ist der Output eines Wizards. Für AON müßtest Du aber statt PPoE PPTP auswählen und dort Deine Teilnehmerkennung und Passwort eingben. Natürlich nur falls der Menüpunkt PPTP vorhanden ist, sonst gehts eh nicht:

Hardware Instructions:

1. Before you connect any cables, make sure there is no disc in the disc tray of your console.

2. Turn the console off, then turn off your modem and disconnect the modem from its power source.

3. Connect one end of the Ethernet cable to the Ethernet port on the back of your console.

4. Connect the other end of the Ethernet cable to the LAN port on your modem. Your modem's LAN port may be labeled LAN, Ethernet, or with a number. Do not connect the cable to the port labeled WAN.

5. Turn on your console.

6. Wait 30 seconds and turn on your modem.



Xbox 360 Software Instructions:

7. In the System area of the Xbox dashboard, select Network Settings.

8. Select Edit Settings.

9. Select the Additional Settings tab, and then select PPPoE Settings.

10. Enter the PPPoE information provided to you by your ISP and select Done.

11. Repeat the previous two steps for Password and Service Name, if required.

12. Select Done.

13. When prompted, select Test Xbox Live.

Sag Bescheid obs funktioniert.

Antworten

Wer ist online?

Mitglieder in diesem Forum: 0 Mitglieder und 0 Gäste